57
OPTION menu
Item Description
MY BUTTON
(continued)
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (
30).
•
FILTER RESET: Displays the filter time reset confirmation dialogue
(
55).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (
51) appear or disappear.
• AV MUTE: Turns the picture and audio on/off.
• RESOLUTION: Turns on/off the RESOLUTION dialog (
41).
• MIC VOLUME: Turns on/off the MIC VOLUME dialog (
46).
• ECO MODE: Turns on/off the ECO MODE dialog (
43).
MY SOURCE
Using ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
You can use this function not only for document cameras but also
computers and other equipment.
COMPUTER IN1
COMPUTER IN2
LAN
USB TYPE A
VIDEO
S-VIDEO
COMPONENT
HDMI
USB TYPE B
SERVICE
Selecting this item displays the SERVICE
menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to execute
the item.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
The HIGH is the mode for use at highlands etc. If the projector is used
at an altitude of about 1600 m or higher, select HIGH. Otherwise, select
NORMAL. Note that the projector is noisier when the HIGH is selected.
HIGH
NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the
DISABLE is selected, the automatic adjustment feature is disabled.
FINE
FAST
DISABLE
FINE: Finer tuning including H.SIZE adjustment.
FAST: Faster tuning, setting H.SIZE to prearranged data for the
input signal.
•
Depending on conditions, such as input image, signal cable to the
projector, environment around the projector, etc., the automatic adjustment
may not work correctly. In such a case, please choose DISABLE to
disable the automatic adjustment, and make adjustment manually.
(continued on next page)
To Next Page
Loading...
