16
Communication settings
For communication setting, use the OPTION - SERVICE - COMMUNICATION
menu. (
OPTION menu - SERVICE - COMMUNICATION in the Operating
Guide)
Item Condition
BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps
Data length 8 bit (fixed)
PARITY NONE/ODD/EVEN
Start bit 1 bit (fixed)
Stop bit 1 bit (fixed)
Transmission method HALF-DUPLEX/FULL-DUPLEX
NOTE •
For connecting the projector to your devices, please read the
manual for each devices, and connect them correctly with suitable cables.
• Turn off (the power of ) both the projector and other devices and unplug ,
beore connecting them.
• For details of Transmission method, refer to 6.4 Transmission method in the
Network Guide.
Network Bridge Communication (continued)
To Next Page
Loading...
