To Next PageTo Next Page
Need help?Do you have a question about the Hitachi CP-TW2505 and is the answer not in the manual?
General| Number of colors | 16.78 million colors |
|---|---|
| Native aspect ratio | 16:10 |
| Projection distance | 0.13 - 0.41 m |
| Projection technology | 3LCD |
| Supported aspect ratios | 4:3, 16:10, 16:9 |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 60 - 100 \ |
| Projector native resolution | WXGA (1280x800) |
| Keystone correction, vertical | -5 - 5 ° |
| Vertical synchronization (max) | 0.12 kHz |
| Vertical synchronization (min) | 0.05 kHz |
| Horizontal synchronization (max) | 106 kHz |
| Horizontal synchronization (min) | 15 kHz |
| Throw ratio | 0.3:1 |
| Fixed focal length | 4.21 mm |
| Aperture range (F-F) | 1.8 - 1.8 |
| Lamp power | 250 W |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| Service life of light source (economic mode) | 10000 h |
| RMS output power (max) | 16 W |
| Number of built-in speakers | 1 |
| 3D | No |
| Supported video modes | 480i, 480p, 576i, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM |
| HDMI connector type | Full-size |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| VGA (D-Sub) ports quantity | 3 |
| Certification | RCM, UL |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 360 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Placement | Wall |
| Product type | Ultra short throw projector |
| Product color | White |
Weight and Dimensions| Depth | 361 mm |
|---|---|
| Width | 376 mm |
| Height | 137 mm |
| Weight | 4490 g |
Illustrates and lists the various input and output ports on the projector.
Provides guidance on positioning the projector for optimal viewing and stability.
Explains how to connect various devices, such as computers and media players, to the projector.
Details how to connect the power cord and install security features like a bar and slot.
Outlines the steps to power on the projector and initial settings.
Explains the procedure for safely powering down the projector.
Details how to initiate and calibrate the interactive whiteboard function.
Explains how to access and navigate through the projector's menu interface.
Covers IWB calibration and aspect ratio settings within the Easy Menu.
Describes settings for Picture Mode, Eco Mode, Installation, and Reset options in the Easy Menu.
Covers adjustments for brightness, contrast, HDCR, and accentualizer for picture quality.
Details gamma adjustments and how to set custom picture modes.
Explains how to adjust color temperature, overall color, and tint for accurate image reproduction.
Covers sharpness, active iris control, and saving/loading picture settings.
Covers settings for progressive scan, video noise reduction, and color space selection.
Explains settings for video format, digital format, and signal range.
Details settings for computer input sources and frame lock synchronization.
Guides on selecting and customizing the display resolution for input signals.
Covers the D-ZOOM and D-SHIFT functions for image magnification and positioning.
Details PICT.POSIT.H and the two KEYSTONE adjustments for image alignment.
Guides on using the PERFECT FIT feature to adjust image corners and sides.
Covers Auto Eco Mode and general Lamp & Filter settings and management.
Guides on adjusting volume, enabling/disabling the speaker, and selecting audio input sources.
Guides on setting, changing, and recovering projector security passwords.
Explains how to set up and manage passwords for the MyScreen feature.
Details how to enable PIN lock and procedures for forgotten PIN codes.
Covers setting and managing passwords for custom text display.
Lists the necessary Mac computer specifications and software for USB display.
Provides step-by-step instructions for safely replacing the projector lamp.
Guides on how to clean and replace the projector's air filter unit.
Explains the proper procedure for cleaning the projector's projection window and camera lens.
Details the process for replacing the internal clock battery.
Lists common messages and their descriptions, aiding in troubleshooting.
Explains the meaning of different indicator lamp combinations for diagnosing issues.
Covers resetting all settings and addresses phenomena mistaken for machine defects.
