Hitachi CP-X3014WN - Security Settings

32
3.1.9 Security Settings
Displays and congures passwords and other
security settings.
Item Description
User Account Congures the user name and password.
User name
Congures the user name.
The length of the text can be up to 32 alphanumeric
characters.
Password
Congures the password.
The length of the text can be up to 255 alphanumeric
characters.
Re-enter Password Reenter the above password for verication.
Network Control
Congures the Authentication password for Network Control
Port1 (Port: 23), Network Control Port2 (Port: 9715),
PJLink™ Port (Port: 4352), My Image Port (Port: 9716),
and Messenger Port (Port: 9719)
(
&22, 23)
.
Authentication
Password
Congures the Authentication password.
The length of the text can be up to 32 alphanumeric
characters.
Re-enter
Authentication
Password
Reenter the above password for verication.
SNMP Congures the community name if SNMP is used.
Community name
Congures the community name. The length of the text can
be up to 64 alphanumeric characters.
Click the [Apply] button to save the settings.
• The new conguration settings are activated after restarting the
network connection. When the conguration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking the [Network Restart] on the main menu (
&41).
• Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
NOTE
3. Web Control
3.1 Projector Web Control (continued)