K
Kelly LewisAug 31, 2025
What to do if the internal temperature is rising in Hitachi Projector?
- JjoshuagarciaAug 31, 2025
Turn off the power and allow your Hitachi Projector to cool down for at least 20 minutes.
What to do if the internal temperature is rising in Hitachi Projector?
Turn off the power and allow your Hitachi Projector to cool down for at least 20 minutes.
How to fix low volume on Hitachi Projector?
Increase the volume using the menu function or the remote control of your Hitachi Projector.
What to do if input changeover settings are mismatched on Hitachi Projector?
Select the correct input signal on your Hitachi Projector and adjust the settings accordingly.
What to do if the electrical power cord is not plugged in Hitachi Projector?
Make sure to correctly connect the power cord to your Hitachi Projector.
How to troubleshoot 'no input signal' on a Hitachi Projector?
If your Hitachi Projector shows 'no input signal,' verify that the signal input connection is secure and check the status of the signal source.
What to do if it is time to clean the air filter in Hitachi CP-X4014WN?
Immediately turn off the power and clean or change the air filter of your Hitachi Projector.
What to do if interior portion has become overcooled in Hitachi CP-X4014WN Projector?
Resolution | XGA (1024 x 768) |
---|---|
Contrast Ratio | 2000:1 |
Display Type | 3LCD |
Zoom Ratio | 1.2x |
Aspect Ratio | 4:3 |
Projection Size | 30 - 300 inches |
Native Resolution | XGA (1024 x 768) |
Brightness | 4000 ANSI lumens |
Weight | 3.6 kg |
Throw Ratio | 1.5 - 1.8 |
Input Ports | VGA, Composite Video, S-Video |
Output Ports | VGA, Audio |
Noise Level | 37 dB (Normal Mode) / 29 dB (Eco Mode) |