31
1.8 Confirming the connection to your destination (continued)
The projector you want to send your images
to is in the Slideshow mode in the PC-LESS
Presentation.
A Slideshow is currently running on the projector that you are trying to display to.
The projector is not set to the LAN as an
input signal.
Are you sure you want to change the input channel of the Projector to LAN?
• Click
the
[Yes], then the projector will stop
the Slideshow and switch the input source
to the LAN port.
• Click
the
[No], then the projector is
remained in the Slideshow mode, and the
“LiveViewer” main menu is displayed in
stand-by mode on your computer.
• Click
the
[Yes], then the projector is
switched to the LAN.
• Click
the
[No], then the projector is
remained as it is, and the “LiveViewer”
main menu is displayed in stand-by mode
on your computer.
1. Connection to the network
To Next Page
Loading...
