-1-
Fast cutting speed thanks to high-power motor
The Model CR 13V2 can cut various types of construction materials fast and efficiently thanks to a high-
power motor with more than 1000 W of maximum output.
Speed selectable switch trigger
The Model CR 13V2 is equipped with an electronic control circuit for steplessly adjusting cutting speed by
means of a switch trigger, depending on the work conditions and type of workpiece.
Tool-less blade detachable mechanism (Same as Model CR 13VBY)
Recently, most saber saws on the market are coming
equipped with a mechanism that requires no hexagonal
wrench or other tool for mounting and removing saw blades.
The Model CR 13V2 is also equipped with such a mechanism
that enables speedy blade replacement.
Simply pressing a lever to easily mount or remove the saw
blade.
Saw blade mountable in either up or down direction
The Model CR 13V2 is convenient for cutting materials on the floor or near a wall, and also for plunge
cutting on plywood panels since the saw blade can be inversely mounted into position.
Dust-and water-resistant triple-sealing construction
The Model CR 13V2 has a triple-sealing construction that protects against large amounts of dust generated
from the cutting of construction materials such as autoclaved lightweight concrete panels, and also seals
out waste water during pipe-cutting work.
SELLING POINT DESCRIPTIONS
2
Seal ring
Felt ring
O-ring
Plunger
Saw blade
Base
Material
1 3
Saw blade
Lever
To Next Page
Loading...
Need help?
General
