2
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully understand and
observe the following safety precautions and
warnings. Careless or improper use of the unit may
cause serious or fatal injury.
Off /Stop
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Emergency stop
Always wear eye, head and ear protectors when using
this unit.
Fuel and oil mixture
Warning, kickback danger. Be careful of possible
sudden and accidental upward and/or backward
motion of the guide bar.
Chain oil fi ll
One-handed usage not permitted. While cutting, hold
saw fi rmly with both hands with thumb fi rmly locked
around front handle.
Carburetor adjustment - Idle speed
Chain brake Carburetor adjustment - Low speed mixture
Choke Carburetor adjustment - High speed mixture
On/Start Priming pump
Contents
WHAT IS WHAT? ...............................................................................3
WARNINGS AND SAFETY INSTRUCTIONS ...................................4
SPECIFICATIONS .............................................................................6
ASSEMBLY PROCEDURES ..............................................................7
OPERATING PROCEDURES ............................................................7
MAINTENANCE ...............................................................................12
000BookCS33EBEng.indb2000BookCS33EBEng.indb2 2012/05/1414:55:252012/05/1414:55:25
To Next Page
Loading...
Need help?
General
