-8-
2. Connecting the fuel pipes
Make the connections as shown in the illustration below.
(1) Fully insert the pipes down to their roots.
(2) Do not bend or twist the pipes.
(3) Be careful not to get pipes in the respective portions caught in other parts.
(4) The end faces of the Fuel Pipe 2.5 x 4 x 90 [43] and Fuel Pipe [68] should protrude from the edge of the
Fuel Grommet [152] by 55 to 60 mm and 167 to 172 mm, respectively.
CAUTION: Never mix up fuel pipes inserted into the Priming Pump Comp. [44].
Ɣ Fuel pipe connection chart
Priming Pump Comp. [44]
Fuel Pipe [72]
Carburetor Ass’y [52]
Fuel Pipe 2.5 x 4 x 90 [43]
Fuel Pipe [68]
Cleaner Support [71]
Clip [31]
Fuel Pipe (FKM) [51]
Clip [31]
Fuel Grommet (A) [41]
Grommet [42]
7 mm or more
Color: Black
Color:
Transparent
CAUTION: Check the positional
relation of the Fuel
Pipes [68] and [72].
7 mm or more
Fuel Pipe 2.5 x 4 x 90 [43]
Fuel Pipe [68]
Fuel Grommet [152]
To Next Page
Loading...
