To Next PageTo Next Page
Need help?Do you have a question about the Hitachi CS51EAP and is the answer not in the manual?
Indicates a strong possibility of severe personal injury or loss of life if instructions are not followed.
Explains consequences of unsafe use and the need to read the manual before operating the power tool.
Explains kickback occurrence and how to avoid it through safe handling and grip.
Covers general safe operating practices, personal protective equipment, and handling.
Explains the significance of warning symbols used in the manual and on the machine.
Details symbols for carburetor adjustments, oiling, and other technical settings.
Defines symbols related to machine controls like choke, on/start, and stop.
Identifies and describes controls like throttle lever, stop switch, choke, and starter.
Explains essential parts such as guide bar, saw chain, chain brake, and spiked bumper.
Describes tools like the combi box spanner and the handling instructions manual.
Details personal protective equipment, fatigue, children, hearing, and environmental awareness.
Covers inspection, part replacement, accessory use, and modification warnings.
Outlines precautions for mixing, pouring, and storing fuel, including fire prevention.
Provides guidelines for safe cutting practices, including kickback avoidance and material handling.
Covers proper maintenance procedures, spark plug removal, and authorized service.
Details safe methods for transporting and storing the unit, including fuel management.
Lists type of equipment, engine size, spark plug, fuel/oil tank capacity, and dry weight.
Details chain pitch, gauge, sound levels, and vibration levels.
Includes guide bar length, chain type, engine power, speeds, fuel consumption, and chain speed.
Instructions to check and ensure the chain brake is disengaged before starting assembly.
Steps for removing side case, installing guide bar, and aligning chain on sprocket.
Guidance on adjusting chain tension and checking for proper clearance.
Details on using the correct fuel/oil mixture, fueling precautions, and ventilation.
Instructions for filling chain oil and adjusting the oil supply quantity.
Explains how the chain brake works and how to test its activation for safety.
Step-by-step guide for starting the engine, including ignition, choke, and starter.
Procedures for warming engine, safe stopping, and function of safety features like chain catcher.
Provides essential safety warnings and precautions before attempting cutting techniques.
Explains how cutting direction affects reactive force and sawdust direction.
Covers tree condition assessment, safety zone establishment, and retreat path planning.
Details the process of creating the notch and the felling cut, including hinge creation.
Instructions for felling trees whose trunk diameter exceeds twice the guide bar length.
Covers safety precautions and methods for removing branches from a felled tree.
Introduces techniques for cutting logs into smaller pieces, focusing on pressure and pinching.
Techniques for cutting logs larger than the guide bar length, including boring cuts.
Procedures to safely free a chain saw that has become stuck in a log.
Details on adjusting the carburetor for optimal performance and setting the correct idle speed.
Instructions for cleaning and replacing the air filter to prevent malfunctions.
Guidance on checking, cleaning, and replacing the spark plug for engine performance.
Procedures for cleaning the oiler port and guide bar groove for proper chain lubrication.
Instructions for cleaning the fuel filter and cylinder fins to maintain engine health.
How to adjust the system to prevent carburetor icing during winter operation.
Steps to prepare the unit for long-term storage, including fuel draining and cylinder oiling.
Identifies key parts of a chain cutter and general filing techniques.
Instructions on lowering depth gauges and general filing techniques for chain cutters.
Specifies the correct angles for sharpening saw chain cutters for optimal performance.
Provides a schedule for daily, weekly, and monthly maintenance tasks.
Lists compatible replacement bar and chain combinations by model number.
General
