Need help?Do you have a question about the Hitachi DH 24PM and is the answer not in the manual?
General| Brand | Hitachi |
|---|---|
| Model | DH 24PM |
| Category | Rotary Hammer |
| Language | English |
Detailed technical data including model, capacity, power source, rotation speed, weight, and enclosure materials.
Step-by-step guide for disassembling the striking mechanism section of the rotary hammer.
Details the procedure for removing the change lever by pressing the button and rotating it.
Explains how to disassemble the tool retainer by sliding the grip and removing components.
Details removing parts around the grip, retaining rings, and the chuck holder.
Describes using a jig to remove the chuck holder by loosening screws and using a torque wrench.
Explains how to remove the cylinder from the gear cover using a hand press and jig.
Details removing retaining rings, gears, springs, and other components from the cylinder.
Describes removing stopper rings, O-rings, dampers, and hammer holders from the cylinder.
Explains using a pinion sleeve puller to remove the pinion sleeve from the gear cover.
Step-by-step guide for reassembling the rotary hammer components in reverse order.
Details where and how to apply special grease and Molub Alloy to various components during reassembly.
Describes mounting components into the cylinder and fitting the stopper ring using a jig and hand press.
Explains how to mount the change lever by pressing the button and adjusting it to the correct position.
Details press-fitting the first gear onto the second shaft and checking for smooth rotation of the bearing.
Provides guidance on applying grease to the inner circumference of the oil seal before press-fitting.
Describes pushing felt packing, valve, and felt packing into the inner cover assembly.
Explains how to mount the lock grip, spring, lock ring, and bit holder/chuck holder.
Details the procedure for mounting the piston onto the assembly.
Describes aligning and reinstalling the gear cover, engaging clutch claws, and checking rotation.
Lists the specified tightening torques for various screws used in the assembly and disassembly.
Illustrates the wiring connections for the product including a noise suppressor.
To Next Page
