To Next PageTo Next Page
Need help?Do you have a question about the Hitachi DH 28PC and is the answer not in the manual?
General| Input power | 720 W |
|---|---|
| Power source | AC |
| Impact rate | 4000 bpm |
| Rated speed (max) | 1050 RPM |
| Impact energy (max) | 3.5 J |
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 28 mm |
| Reverse | Yes |
| Chuck type | SDS Plus |
| Product color | Black, Green, Silver |
Weight and Dimensions| Depth | 316 mm |
|---|---|
| Width | 102 mm |
| Height | 208 mm |
| Weight | 3500 g |
| Package depth | 520 mm |
| Package width | 390 mm |
| Package height | 130 mm |
| Package weight | 6700 g |
Explains the meaning of signal words like WARNING, CAUTION, and NOTE.
Essential safety guidelines for operating power tools, covering work area, electrical, personal safety, and tool care.
Guidelines for safe handling, grip, and avoiding contact with moving parts.
Importance of guards, secure parts, clean vents, and tool condition.
Using ear protection, correct tools, and avoiding unintended applications.
Lists and defines symbols used on the tool for clarity.
Explains the double insulation design and necessary precautions for safe use.
Identifies and labels the main components of the power tool.
Technical details and performance characteristics of the rotary hammer.
Lists the various functions and applications of the rotary hammer.
Essential checks and preparations before operating the power tool.
Instructions for installing dust collectors, selecting bits, and confirming rotation direction.
How to operate the power tool's switch for variable speed control.
How to set and use different operational modes like rotation and hammering.
Procedures for performing drilling, driving screws, and using the depth stopper.
Guidance on using taper shank drill bits, core bits, chuck adapters, and related accessories.
How to reposition the side handle for better control and safety.
Steps for mounting and using the core bit for light load applications.
Procedures for performing boring operations and safely removing the core bit.
Guidance on inspecting and replacing drill bits, screws, and carbon brushes.
Maintaining the motor and understanding grease replacement periods.
Information on authorized service centers and replacement parts.
Guidance on referencing the parts list for service and repairs.
Lists the accessories included with the power tool.
Optional accessories for drilling anchor holes and large hole boring applications.
Optional accessories for demolition, groove digging, and grooving tasks.
Optional accessories for driving screws, bolt placement, and dust collection.
Information on hammer grease and other consumables.
