Hitachi DH 28PC - LUBRICANTS AND CONSUMABLES

20
English
Guide plate
Core bit
(outer diameter)
1-1/4" (32 mm)
1-3/8" (35 mm)
1-1/2" (38 mm)
1-3/4" (45 mm)
Core bit
(outer diameter)
2" (50 mm)
2-9/16" (65 mm)
3-5/32" (80 mm)
Code No.
982686
982687
982688
982689
Code No.
982690
982691
982692
4. Demolishing operation (Hammering only)
Bull point (Round type) (SDS-plus shank)
Code No. 303046
Bull point (Square type) (SDS-plus shank)
Code No. 316656
5. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank)
Code No. 316657
Cutter (SDS-plus shank)
Code No. 316658
6. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
Code No. 316659