Hitachi DH 28PC - OPTIONAL ACCESSORIES; ACCESSORIES FOR ANCHORING AND BORING; ACCESSORIES FOR DEMOLITION AND GROOVING

18
English
OPTIONAL ACCESSORIES (sold separately)
1. Drilling anchor holes (Rotation + Hammering)
 Drill Bit (Taper shank) and taper shank adaptor
Taper mode Code No. Applicable drill bit
7/16" (11 mm)
1/2" (12.3 mm)
303617
1/2" (12.7 mm)
9/16" (14.3 mm)
9/16" (14.5 mm)
11/16" (17.5 mm)
303618 7/8" (21.5 mm)
A-taper 303619
B-taper 303620
External dia. Code No.
7/16"
944460
(11 mm)
1/2"
944461
(12.3 mm)
1/2"
993038
(12.7 mm)
9/16"
944462
(14.3 mm)
9/16"
944500
(14.5 mm)
11/16"
944463
(17.5 mm)
7/8"
944464
(21.5 mm)
Morse taper
(No. 1)
Drill bit
(Taper
shank)
Taper shank adaptor formed A-
taper or B-taper is provided as an
optional accessory, but drill bit for
it is not provided.
Morse taper
(No. 2)
Drill bit
(Taper
shank)
Cotter (Code No. 944477)
(2) Taper Shank Adaptor
(SDS-plus shank)
<Outer wedge type with the female screw>
Anchor size
W 1/4" W 5/16" W 3/8"
(6.3 mm) (8 mm) (9.5 mm)
Overall Length
10-1/4" 10-1/4" 6-1/4" 10-1/4"
(260 mm) (260 mm) (160 mm) (260 mm)
Code No. 302976 302975 303621 302974
Anchor Setter (for anchor
setting) (SDS-plus shank)
2. Knock-in anchor (Hammering only)
(1) Drill Bit (Taper Shank)