To Next PageTo Next Page
Need help?Do you have a question about the Hitachi DH24PC3 - 15/16" SDS Plus Rotary Hammer 3 Mode and is the answer not in the manual?
General| Model | DH24PC3 |
|---|---|
| Type | SDS Plus Rotary Hammer |
| Modes | 3 Mode |
| Drilling Capacity in Concrete | 15/16 inch |
| No Load Speed | 0-1, 150 RPM |
| Voltage | 120V |
| Impact Rate | 0-4, 600 IPM |
| Cord Length | 10 ft |
Explains the meaning of signal words like WARNING, CAUTION, and NOTE.
Provides fundamental safety guidelines for operating power tools.
Details on proper usage, maintenance, and handling of the power tool.
Information on qualified personnel for tool service and part replacement.
Lists specific safety precautions and common symbols used on the tool.
Defines various symbols and their meanings as used in the manual.
Explains the double insulation design for enhanced user safety.
Identifies and labels the different components of the rotary hammer.
Provides technical details such as power source, current, and capacity.
Lists the various functions and uses of the rotary hammer.
Essential checks and steps before starting to operate the tool.
Instructions on how to correctly insert and remove drill bits.
Guidance on attaching optional dust collection accessories.
Details on how to use the variable speed trigger switch.
How to set and use the tool in rotation and hammering mode.
How to set and use the tool in rotation only mode.
Instructions for driving machine screws using the tool.
Guidance on driving wood screws, including pilot holes.
How to set and use the tool in hammering only mode.
Instructions for using the depth gauge accessory.
Steps for mounting and using taper shank drill bits.
Steps for mounting the core bit and related accessories.
Procedure for performing boring operations with the core bit.
Instructions for removing the core bit after use.
Guidelines for checking and replacing dull or worn drill bits.
Recommendations for regularly checking and tightening screws.
Precautions for maintaining the motor winding.
Information on inspecting and replacing carbon brushes.
Procedure for replacing the internal grease.
Guidance on authorized service centers for repairs and part replacement.
Lists the accessories included with the product.
Lists accessories available for separate purchase.
Details on using accessories for drilling anchor holes.
Information on taper shank drill bits and their adaptors.
Details on the hammer drill chuck and wrench accessory.
Instructions for using accessories for knock-in anchor applications.
Procedure for boring large holes with specific accessories.
Using accessories for demolition tasks.
Using chisels for groove digging and edging.
Using chisels for grooving applications.
Using accessories for chemical anchor bolt placement.
Using drill chuck and adaptor for drilling and driving screws.
Using drill chuck and adaptor for rotation-only drilling.
Using driver bits for screw driving applications.
Details on dust collection accessories.
Information on the specific hammer grease for the tool.
