Hitachi DH 30PC User Manual

MODEL ROTARY HAMMER
MODÈLE MARTEAU ROTATIF
MODELO MARTILLO GIRATORIO
DH 30PB • DH 30PC
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut
entraîner la mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité
de ce produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser
l’outil motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs
et propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être
conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious
bodily injury!
This manual contains important information about product safety. Please read
and understand this manual BEFORE operating the power tool. Please keep this
manual available for other users and owners before they use the power tool. This
manual should be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede
resultar en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde
este manual para que puedan leerlo otras personas antes de utilizar la herramienta
eléctrica. Este manual debe ser guardado en un lugar seguro.

Hitachi DH 30PC Specifications

General

Chuck Type	SDS Plus
Voltage	120 V
No Load Speed	0-1100 RPM
Drilling Capacity (Steel)	1/2 inch
Vibration Control	No
Drilling Capacity (Wood)	1-1/4 inch

Summary

Important Safety Information

Meanings of Signal Words

Defines WARNING, CAUTION, and NOTE for hazard communication.

Safety Rules and Precautions

General Safety Rules

Covers work area, electrical, and personal safety guidelines.

Specific Safety Rules and Symbols

Detailed safety rules and graphical symbols used in the manual.

Double Insulation for Safer Operation

Explains the double insulation design for enhanced user safety.

Tool Overview

Name of Parts

Identifies and labels the components of the rotary hammer.

Specifications

Lists technical details and performance data for the tool.

Preparation and Operation

Applications

Outlines the various uses and functions of the rotary hammer.

Prior to Operation

Pre-operational checks and setup procedures before use.

Operating Modes and Techniques

Switch Operation and Modes

Covers switch operation and different functional modes.

Screw Driving Techniques

Instructions for driving machine and wood screws.

Striking Only Mode and Stopper Usage

Details on striking mode, chisels, and using the depth stopper.

Specialized Bit Usage (Taper Shank & Core Bit)

Instructions for using taper shank and core bits, including boring.

Maintenance and Inspection

Component Inspection and Care

Guidance on inspecting drill bits, screws, motor, and carbon brushes.

Service and Repairs

Procedures for replacing carbon brushes, grease, and general servicing.