Hitachi DH 30PC2 - User Manual

DH 30PC2
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
MODE D’EMPLOI ET INSTRUCTIONS DE SECURITE
AVERTISSEMENT
Une utilisation incorrecte et dangereuse de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité
de ce produit. Prière de lire et de comprendre ce mode d’emploi avant d’utiliser
l’outil motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs
avant qu’ils utilisent l’outil motorisé.
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
WARNING
Improper and unsafe use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read
and understand this manual before operating the power tool. Please keep this
manual available for others before they use the power tool.
MANUAL DE INSTRUCCIONES E INSTRUCCIONES DE SEGURIDAD
ADVERTENCIA
¡La utilización inapropiada e insegura de esta herramienta eléctrica puede
resultar en lesiones serias o en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y comprenda este manual antes de utilizar la herramienta eléctrica. Guarde
este manual para que puedan leerlo otras personas antes de que utilicen la
herramienta eléctrica.
Model Rotary Hammer
Modèle Marteau rotatif
Modelo Martillo perforador
01Eng_DH30PC2_US.p65 10/25/12, 1:36 PM1
Black

Summary

Instruction Manual and Safety Instructions

IMPORTANT SAFETY INFORMATION

MEANINGS OF SIGNAL WORDS

Explains the meaning of signal words like WARNING and CAUTION used in the manual.

SAFETY

GENERAL POWER TOOL SAFETY WARNINGS

Provides essential safety advice for operating any power tool.

SPECIFIC SAFETY RULES AND SYMBOLS

DOUBLE INSULATION FOR SAFER OPERATION

FUNCTIONAL DESCRIPTION

NAME OF PARTS

SPECIFICATIONS

ASSEMBLY AND OPERATION

APPLICATIONS

PRIOR TO OPERATION

Outlines essential checks and preparations before starting to use the tool.

HOW TO USE

Switch operation

Rotation + Hammering

Describes how to set and use the tool in rotation and hammering mode.

Rotation only Operation

Hammering only Operation

HOW TO USE THE CORE BIT (FOR LIGHT LOAD)

Mounting Core Bit

MAINTENANCE AND INSPECTION

Inspecting the drill bits

Maintenance of the motor

Inspecting the carbon brushes

Service and Repairs

ACCESSORIES

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES

Drilling Anchor Holes

Knock-in Anchor

Hitachi DH 30PC2 Specifications

General

Input power	850 W
Power source	AC
Impact rate	3700 bpm
Weight (including battery)	4309 g
Carrying case	Yes

Weight and Dimensions

Depth	356 mm