PRODUCT NAME
Hitachi Rotary Hammer
Model DH 50MRY, DH 50MR
The new Model DH 50MRY is capable of drilling maximum 50-mm diameter holes into concrete and compatible
with SDS max shank tools. Equipped with the low vibration mechanism, the performance, durability and operabilit
are greatly improved. The Model DH 50MRY is released with the low-vibration hammer drill Model
DH 40MRY as our low-vibration series.
The new Model DH 50MR is an upgraded version of the current Model DH 50MB. The performance, durability and
operability are also improved greatly even though it is not equipped with the low vibration mechanism.
LIST Nos.
DH 50MRY: E499
DH 50MR: E498
Sep. 2007
Drilling holes in concrete and drilling anchor holes.
Demolishing and chiseling of concrete. Edging, gravel road digging, compacting and tamping, grooving,
cutting, stripping and roughing, etc.
MARKETING OBJECTIVE
APPLICATIONS
SELLING POINTS
International Sales Division
D
<New features>
Equipped with a pendulum dynamic absorber as
the low vibration mechanism (Model DH 50MRY
only)
Fastest drilling speed and greatest chiseling
performance in the class
<Same features as the conventional models>
Vibration-absorbing handle
Constant speed with variable speed control
Easy-to-operate and double-molded switch handle
and side handle
Variable lock mechanism for easy working-angle
adjustment of chisels etc.
Needle-pin type slip clutch
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
To Next Page
Need help?
General
