K6610007
Rev.5
02.14.’03 - 71 -
6.3.2.8.13 SMART Write Log Sector [B0h, Sub D6h]
Task File Registers 7 6 5 4 3 2 1 0
Command B0h
Cylinder High C2h
Cylinder Low 4Fh
Device/Head - X - DRV XX
Sector Number Log Address
Sector Count Number of sector to be written
Features D6h
DRV : Device selection bit 0 : DRV0 1:DRV1
SMART Write Log Sector Command writes an indicated number of 512 byte data sector to the indicated log
sector. Host vendor specific logs are used by the host to store any data desired using the SMART Write Log
Sector Command. Sector Number indicated the log to be written as described in section “6.2.7.8.7 SMART
Read Log Sector”. If the host attempts to write to a read only log address, the device returns command
aborted.
To Next Page
Loading...
Need help?
General