English
10
2. Battery Charger (UC10SL2)
Fig. 2
SPECIFICATIONS
1. Cordless Driver Drill (DS10DFL2)
2. Battery Charger (UC10SL2)
Motor DC motor
No-load speed
Low 0 – 350 / min
High 0 – 1,300 / min
Wood (Thickness
1 – 1/8" (29 mm)
Drilling
11/16" (18 mm))
Capacity
Metal (Thickness 3/8" (10 mm)
1/16" (1.6 mm)) (Mild Steel)
Screw Wood screw #12 × 1-25/32" (5.8 mm × 45 mm)
Driver Small screw 1/4" (6 mm)
Model BCL1015S
Type Lithium - ion battery
Battery
Voltage DC 10.8 V
Charging & discharging
About 1,000 times
frequency
Weight 2.2 lbs. (1.0 kg)
Input power source Single phase: AC 120 V 60 Hz
Charging time
Approx. 25 min.
(At a temperature of 68°F (20°C))
Charging voltage DC 10.8 V
Charging current DC 3.0 A
Weight 0.8 lbs. (0.35 kg)
NOTE: The charging time may vary according to temperature and power source voltage.
Nameplate
Body
Battery installation hole
Pilot lamp
Symbol mark
01Eng_DS10DFL2_US.p65 4/29/14, 9:28 AM10
To Next Page
