To Next PageTo Next PageWhy my Hitachi DS 12DVF3 will not start?
If your Hitachi Drill won't start, there are a few potential reasons. First, ensure the battery is correctly installed. If it is, the battery may not be charged, so try charging it with the appropriate charger. Finally, the battery could be overheated; in this case, remove it from the tool and allow it to cool down.
What to do if the battery of my Hitachi Drill will not charge?
If the battery of your Hitachi Drill isn't charging, several factors could be at play. Start by ensuring the battery pack is correctly inserted into the charger until the charge status lamp (red) appears. Next, verify that the charger is plugged into a working outlet. Also, the battery temperature might be too hot or too cold. If it's too hot, remove the battery from the charger and let it cool. If it's too cold, move both the battery and charger to an area where the surrounding air temperature is above 50°F (10°C).
What to do if my Hitachi DS 12DVF3 battery will not charge?
If the battery of your Hitachi Drill is not charging, make sure the battery pack is correctly installed into the charger until the charge status lamp (red) appears. Also, verify that the charger is properly plugged into a working receptacle. Another reason could be that the battery temperature is either too hot or too cold. If the battery is too hot, remove it from the charger and allow it to cool. If the battery is too cold, remove it and move both the battery and charger to an environment with a surrounding air temperature above 50°F (10°C).
General| Type | Cordless Drill |
|---|---|
| Voltage | 12V |
| Battery Capacity | 1.5 Ah |
| Chuck Size | 3/8 in |
| Battery Type | NiCd |
Defines warning, caution, and note terms used in the manual.
Provides fundamental safety guidelines applicable to all battery-powered tools.
Outlines critical safety precautions for operating the battery charger.
Details specific safety rules and explains symbols used on the tool.
Explains the meaning of symbols like voltage, current, and speed indicators.
Essential safety guidelines for the proper use of batteries and chargers.
Proper procedures for disposing of used batteries, emphasizing recycling and local regulations.
Lists the available models of the cordless driver drill.
Identifies and illustrates the different parts of the cordless driver drill.
Describes the various uses of the cordless driver drill.
Step-by-step guide on how to install and remove the battery pack.
Instructions on how to properly charge the tool's battery using the provided charger.
Pre-operation checks and preparations for safe and effective use.
Guidance on attaching and using the tool's hook for various purposes.
Instructions for using the integrated auxiliary light feature.
Steps for replacing batteries in the auxiliary light feature.
How to use the accessory bit holder for storing and accessing bits.
Procedures for securely attaching and removing drill bits from the chuck.
How to check and set the forward/reverse rotation direction of the tool.
Instructions on adjusting the tool's rotational speed using the shift knob.
How to set the clutch dial for appropriate torque control.
Guidelines for adjusting the tool's tightening torque for different applications.
Recommends specific clutch dial settings and usage tips for drilling and screw tightening.
Provides a table to help select the correct tightening torque based on clutch dial position and application.
Importance of checking bits for wear or damage to maintain efficiency and safety.
Regular inspection of screws to ensure they are tight and prevent hazards.
How to clean dust from the tool using appropriate methods and materials.
Proper procedures for disposing of used batteries, emphasizing recycling and local regulations.
Guidelines for storing the tool and battery in a safe environment.
Emphasizes that all service and repairs must be done by an authorized Hitachi service center.
Information regarding parts lists for service and repair requests at authorized centers.
Lists the accessories included as standard with each model of the driver drill.
Lists optional accessories available for purchase to enhance tool functionality.
