Why my Hitachi DS 12DVF3 will not start?
If your Hitachi Drill won't start, there are a few potential reasons. First, ensure the battery is correctly installed. If it is, the battery may not be charged, so try charging it with the appropriate charger. Finally, the battery could be overheated; in this case, remove it from the tool and allow it to cool down.
What to do if the battery of my Hitachi Drill will not charge?
If the battery of your Hitachi Drill isn't charging, several factors could be at play. Start by ensuring the battery pack is correctly inserted into the charger until the charge status lamp (red) appears. Next, verify that the charger is plugged into a working outlet. Also, the battery temperature might be too hot or too cold. If it's too hot, remove the battery from the charger and let it cool. If it's too cold, move both the battery and charger to an area where the surrounding air temperature is above 50°F (10°C).
What to do if my Hitachi DS 12DVF3 battery will not charge?
If the battery of your Hitachi Drill is not charging, make sure the battery pack is correctly installed into the charger until the charge status lamp (red) appears. Also, verify that the charger is properly plugged into a working receptacle. Another reason could be that the battery temperature is either too hot or too cold. If the battery is too hot, remove it from the charger and allow it to cool. If the battery is too cold, remove it and move both the battery and charger to an environment with a surrounding air temperature above 50°F (10°C).
General| Type | Cordless Drill |
|---|---|
| Voltage | 12V |
| Battery Capacity | 1.5 Ah |
| Chuck Size | 3/8 in |
| Battery Type | NiCd |
To Next Page
