EasyManua.ls Logo

Hitachi DS14DBL - Specifications; Standard Accessories

Hitachi DS14DBL
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
8
10. Do not use in a location where strong static electricity
generates.
11. If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears abnormal
during use, recharging or storage, immediately remove it
from the equipment or battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your eyes, do not
rub your eyes and wash them well with fresh clean water
such as tap water and contact a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well with
clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you nd rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using the
battery for the rst time, do not use and return it to your
supplier or vendor.
WARNING
If a conductive foreign matter enters in the terminal of lithium
ion battery, the battery may be shorted, causing re. When
storing the lithium ion battery, obey surely the rules of
following contents.
Do not place conductive debris, nail and wires such
as iron wire and copper wire in the storage case.
To prevent shorting from occurring, load the battery
in the tool or insert securely the battery cover for
storing until the ventilator is not seen (See Fig. 1).
SPECIFICATIONS
POWER TOOL
Model DS14DBL DS18DBL
No-load
speed
Low
High mode 0 – 350 /min 0 – 350 /min
Medium mode 0 – 300 /min 0 – 300 /min
Low 2 mode 0 – 250 /min 0 – 250 /min
Low 1 mode 0 – 180 /min 0 – 180 /min
High
High mode 0 – 1600 /min 0 – 1700 /min
Medium mode 0 – 1300 /min 0 – 1400 /min
Low 2 mode 0 – 1100 /min 0 – 1200 /min
Low 1 mode 0 – 850 /min 0 – 900 /min
Capacity
Drilling
Wood
(Thickness 18 mm)
50 mm 65 mm
Metal
(Thickness 1.6 mm)
Steel: 13 mm,
Aluminum: 13 mm
Driving
Machine screw 6 mm
Wood screw
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
8 mm (diameter) × 100 mm (length)
(Requires a pilot hole)
Rechargeable battery
BSL1430: Li-ion 14.4 V
(3.0 Ah 8 cells)
BSL1830: Li-ion 18 V
(3.0 Ah 10 cells)
Weight 1.9 kg 2.0 kg
CHARGER
Model UC18YRSL
Charging voltage 14.4 – 18 V
Weight 0.6 kg
STANDARD ACCESSORIES
DS18DBL
1
Plus driver bit (No. 2) ..............................1
2
Charger (UC18YRSL) .............................1
3
Battery (BSL1830) ..................................2
4
Plastic case .............................................1
5
Battery cover ...........................................1
6
Side handle .............................................1
DS14DBL
1
Plus driver bit (No. 2) ..............................1
2
Charger (UC18YRSL) .............................1
3
Battery (BSL1430) ..................................2
4
Plastic case .............................................1
5
Battery cover ...........................................1
6
Side handle .............................................1
Standard accessories are subject to change without notice.
000BookDS14DBLAra.indb8000BookDS14DBLAra.indb8 2012/06/1216:38:282012/06/1216:38:28

Related product manuals