HL500 Heat Gun
• Great for general purpose work
• 1,500W of flameless heat
• 2 temperature ranges
• 2 air speed settings
• Ceramic core protects the heating
element – ensures a longer working
life
• Unique body design allows the gun to
stand upright for no hands operation
HM1304 Demolition Breaker
• Powerful 1,500W motor
• Accepts 30mm hexagonal bits
• Convenient lock-on button for
continuous operation
• Secure locking bit system
• Internal ‘O’ ring fits around the end of
the bit to ensure damaging masonry
dust is kept out of the cylinder
HP1620KSP 13mm Hammer Drill
• Extremely light, compact and a
powerful 650W motor
• The reversing system ensures full
power in both forward and reverse
• Large trigger switch for easy operation
• Ergonomic in-line design for maximum
power, control and comfort
• Side handle swivels 360°
• Includes 9 piece bit set and case
HP1621KSP 13mm Hammer Drill
• Extremely light, compact and a
powerful 650W
• The reversing system ensures full
power in both forward and reverse
• Large trigger switch for easy operation
• Ergonomic in-line design for maximum
power, control and comfort
• Keyless chuck
• Includes 9 piece bit set and case
HP2051 20mm 2 Speed Hammer Drill
• These power packed hammer drills
will take on the most demanding jobs
with ease
• Built in torque limiter reduces risk of
damage to the drill and operator if the
bit jams
• 2 speed gearbox with forward/reverse
• Keyless chuck
HP2071F 20mm 2 Speed Hammer Drill
• Super powerful 1,010W motor
• 2 speed mechanical gearbox
• Variable speed trigger and electronic
speed adjusting dial
• A torque limiter to protect you and the
tool from damage
• Built-in Maklite casts a light onto
the drilling area when lighting is
inadequate
HR2020 20mm Rotary Hammer
• 2 mode operation rotary hammer in
masonry, standard drilling in other
materials (optional chuck adaptor and
chuck)
• Positive slide lock chuck accepts all
SDS type bits
• Variable speed with reverse
• Torque limiter to protect the tool and
operator if the bit should jam
HR2450 24mm Rotary Hammer
• 2.7 joules
• Versatile 3 mode operation for rotary
hammer, hammer only in masonry,
standard drilling in other materials
(optional chuck adaptor)
• Chuck accepts all SDS type bits
• Variable speed with reverse
HR2450FT 24mm Rotary Hammer
• 2.7 joules
• Versatile 3 mode operation for rotary
hammer, hammer only in masonry,
standard drilling in other materials
(optional chuck adaptor)
• Chuck accepts all SDS type bits
• HR2450FT comes standard with SDS
chuck and keyless drill chuck
• Maklite built into the handle casts
light directly onto the work area
HR3000C 30mm Rotary Hammer
• 5.3 joules per impact
• 3 mode dial selects hammer, drill or
hammer drill
• Variable speed control dial
• Auto cut out brushes and service
indicator light minimises down time
and maximises motor life
HR4000C 40mm Rotary Hammer
• Electronic variable speed control dial
• Soft start electronic switch
• Automatic cut out brushes with service
indicator light and torque limiter
• 2 mode operation – rotation with
hammer and hammer only
• D-handle for chiselling and straight
handle for drilling
HR5001C 50mm Rotary Hammer
• Power packed to handle drill bits
up to 50mm diameter with 2 mode
operation – rotation with hammer and
hammer only
• Electronic soft start with a large 3
finger trigger to reduce fatigue during
prolonged work
• Automatic cut out brushes with service
indicator light and torque limiter
Page 36 United Tools National Catalogue 2006
To Next Page
Loading...
Need help?
General