HK0500 Power Scraper
• Powerful 550W motor with 2,000–
3,500bpm for maximum performance
• 12 position bit adjustment
• Variable speed control dial
• Large and comfortable trigger switch
• One touch sliding chuck for easy bit
installation and removal
HK1810 Power Scraper
• For light scraping, chiselling and
chipping; ideal for remodelling or
renovation work
• Air cushion hammering for long tool
life
• Quick change bit retainer
• Automatic cut out brushes
• All ball bearing construction for longer
tool life
• Variable speed
HM0860C Demolition Hammer
• Full wave electronic variable speed
and power control
• 12 joules per impact power
• Spade or chisel can be locked into
12 different positions
• Automatic cut out brushes
• Warning indicator light lets you know
when the tool requires servicing
HM1100C Demolition Hammer
• Powerful 1050 watt motor
• 16 angle settings for chisel bits
• Rubber cladded rear and side handle
for reduced vibration
• Automatic brush cut-out system
• Soft start feature
• Service indicator lamp
• Hammer idling mode
• Slide on and off switch
HM1202C Demolition Hammer
• Large capacity SDS Max demolition
hammer for speed, durability and
comfort
• Electronic speed adjusting dial
• Powerful 1,450W motor to handle the
most demanding jobs
• 12 angle settings for bit position
• Automatic cut out brushes with service
indicator light
HM1304 Demolition Breaker
• Powerful 1,500W motor
• Accepts 30mm hexagonal bits
• Lock-on button for continuous
operation
• Secure locking bit system
• Internal ‘O’ ring fits around the end of
the bit to ensure damaging masonry
dust is kept out of the cylinder
HM1400 Electric Breaker
• Hard hitting reliability in a comfortable
T-grip design
• Air cushioned system prevents
excessive vibration and allows greater
operator comfort
• Automatic cut out brushes
• 30mm hexagonal bit shank
• Auto idle will only hammer when the
bit is in contact with the material
HM1810 Electric Breaker
• Lowest vibration in its class
• AVT counter weight mechanism helps
to reduce vibration
• Auto cut-off brushes
• Warning light indicates trouble with
cord
• 28.6mm Hex shank
JN1601 1.6mm Nibbler
• Clean and precise work in keystone
plate, deck plate and other corrugated
sheet materials
• Die rotates 360°
• Ergonomic, slim body design for easy
gripping
• Lock on sliding switch for continuous
use
• Built-in thickness gauge for
convenience
JN3200 3.2mm Nibbler
• Built-in thickness gauge for
convenience
• Easy punch and die replacement for
less down time
• Powerful 820W motor allows cuts
through 3.2mm mild steel
• Cutting line and blade action easily
visible
JR3050T Recipro Saw
• A huge new 1,010W motor
• Strokes-per-minute have been
increased by almost 20%
• Minimal vibration
• A bigger variable speed trigger with
lock-on button
• Push in tool-less blade change system
with quick release
JR3070CT Recipro Saw
• Featuring AVT counter weight
mechanism which helps reduce
vibration
• Preset dial for speed control for
optimal stroke speed for application
United Tools National Catalogue 2006 Page 37
To Next Page
Loading...
Need help?
General