Hitachi G 18DSL User Manual

INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs et propriétaires
avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être conservé dans un
endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede
resultar en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool.
This manual should be stored in safe place.
Model Cordless Disc Grinder
Modèle Meuleuse sans fil
Modelo Amoladora angular a bateríe
G 14DSL
•
G 18DSL
G14DSL
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
00Cover_G14DSL_US 9/4/13, 15:121

Hitachi G 18DSL Specifications

General

Disc Diameter	125 mm
Hole Diameter	22.23 mm
Spindle Thread	M14 x 2
Overall Length	296 mm
Weight	1.8 kg
Voltage	18 V
Wheel Diameter	125 mm
No Load Speed	9, 100 RPM
No-Load Speed	9, 100 RPM

Summary

Safety Guidelines

General Power Tool Safety Warnings

Provides universal safety guidelines for operating power tools.

Battery Usage and Care

Battery Charging and Handling

Instructions for charging, using, and handling batteries safely.

Grinding Operation Safety Warnings

Grinding Accessory & Guard Safety

Safety rules for selecting and using grinding accessories and guards.

Kickback Hazard Warnings

Preventing Kickback Hazards

Explains kickback hazards and how to prevent them during operation.

Specific Grinding Safety Warnings

Grinding Wheel & Guard Requirements

Specifies requirements for grinding wheels and guards for safety.

Battery Charger Safety

Battery Charger Usage Precautions

Crucial safety guidelines and operating instructions for the battery charger.

Battery & Charger Usage Safety

Battery & Charger Usage Precautions

Essential precautions for using Hitachi batteries and chargers.

Lithium-Ion Battery Caution

Lithium-Ion Battery Protection & Overload

Explains battery protection functions and overload behavior.

Lithium-Ion Battery Handling & Storage

Battery Leakage & Damage Prevention

Instructions for handling battery leakage and preventing damage.

Wheel Assembly & Disassembly

Wheel Mounting & Removal

Detailed steps for assembling and disassembling the depressed center wheel.

Grinder Operation Guide

Grinding Technique & Pressure

Motor & Carbon Brush Maintenance

Carbon Brush Care