To Next PageTo Next Page
Need help?Do you have a question about the Hitachi G13SB and is the answer not in the manual?
General| No-load Speed | 11000 rpm |
|---|---|
| Disc Diameter | 125 mm |
| Weight | 2.3 kg |
| Spindle Thread | M14 |
| Cable Length | 2.5 m |
Prevent body contact with earthed surfaces.
Use eye protection and a dust mask if needed.
Disconnect tools before servicing or changing accessories.
Habitually check for and remove all keys and wrenches before starting.
Ensure switch is off before plugging in; do not carry plugged-in tools.
Inspect damaged parts and repair/replace them by an authorized center.
Using unauthorized accessories may cause personal injury.
Ensure repairs are done by qualified persons using original spare parts.
Always operate the tool with the wheel guards in place.
Use depressed center wheels with appropriate 'Safe Speed'.
Hold the disc grinder firmly with both hands for control.
Confirm switch is OFF before plugging in to prevent immediate startup.
Ensure guard is properly fitted and tightened for safety.
Use correct, undamaged wheels, properly mounted and tightened.
