To Next PageTo Next Page
Need help?Do you have a question about the Hitachi G10SS and is the answer not in the manual?
General| Disc Diameter | 100 mm |
|---|---|
| No Load Speed | 11000 rpm |
| Weight | 1.7kg |
| Wheel Diameter | 100 mm |
| Arbor Size | M10 |
| Spindle Lock | Yes |
| Spindle Thread | M10 x 1.5 |
| Cable Length | 2.5 m |
Explains symbols used in the manual and general safety warnings for safe operation.
Details requirements for eye protection and proper disposal of electrical tools in the EU.
Covers maintaining a clean work area and essential electrical safety precautions.
Emphasizes operator alertness, proper tool handling, and avoiding unintentional starting.
Outlines safety rules for grinding/cutting, including service, accessories, and general precautions.
Details kickback causes, effects, and how to prevent it during operation.
Guidelines for selecting, mounting, and using wheels and guards correctly.
Specific safety measures for abrasive cutting-off operations, including depth and workpiece support.
General safety instructions for operating grinders, including checks and wheel handling.
Continues safety instructions and provides guidance on tool usage.
Details technical specifications, included accessories, and intended applications.
Essential checks before operating the tool, including power, guards, and trial runs.
Advice on grinding pressure, angle, direction, and safe shutdown procedures.
Guidance on inspecting and maintaining the wheel, screws, carbon brushes, and motor.
Presents measured airborne noise and vibration emission values for the tool.
Official statements confirming product compliance with EU directives and standards.
