Need help?Do you have a question about the Hitachi GS4000 Series and is the answer not in the manual?
Read warnings and cautions listed here to use GS4000 safely.
Outlines the guidance flow for setting up GS4000 using this guide book.
Explains how to use GS4000 as a layer 2 or layer 3 switch with various VLAN configurations.
How to use GS4000 as a layer 2 switch with a single VLAN without configuration.
How to use GS4000 as a layer 2 switch with multiple VLANs, requiring configuration.
How to use GS4000 as a layer 2/3 switch by setting IP addresses for inter-VLAN communication.
Overview of GS4000 series manuals, positioning of this guide, and reference methods.
Check if all necessary components and accessories are provided with the GS4000 chassis.
Prepare devices like a setup terminal besides the GS4000 chassis.
Details required specifications for a setup terminal, including communication port and software.
Information on RS-232C cross cables and other interface/DC power cables for setup.
Describes procedures for attaching power cables/memory cards and powering on the GS4000.
Step-by-step guide for installing and powering on the GS4000-80E1 model.
Step-by-step guide for installing and powering on the GS4000-80E2 model.
Step-by-step guide for installing and powering on the GS4000-160E1 model.
Step-by-step guide for installing and powering on the GS4000-160E2 model.
Step-by-step guide for installing and powering on the GS4000-320E (AC) model.
Step-by-step guide for installing and powering on the GS4000-320E (DC) model.
Confirms GS4000 startup process, software installation, and option components.
Sets default VLAN for layer2 switch operation without initial configuration.
Shows the login prompt and initial system welcome message after startup.
Explains how to set time, create administrator ID, and set a password.
Explains procedures for removing the default 'operator' user ID.
Describes how to set configuration information using two simple network examples.
Details how to enter edit mode and set configuration information based on examples.
Check the operation status of the entire GS4000 system.
Check the operation status of network interface boards and lines.
Check detailed information related to the condition of each interface.
Addresses common troubles encountered during operations described in this guide book.
References manuals for troubles not covered or caused by other operations.
Lists manuals providing detailed information on GS4000 operations and management.
Introduces history, abbreviation, and help functions for efficient command entry.
Describes how to perform additional settings and changes to existing configuration information.
Explains how to reset to initial status by deleting configuration files.
General| Jumbo Frame Support | Up to 9KB |
|---|---|
| Power Supply | AC 100-240V, 50/60 Hz |
| Dimensions (W x D x H) | 440 x 44 mm |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10 to 90% RH (non-condensing) |
To Next Page
