Hitachi H 45MA - Accessories; Standard Accessories; Optional Accessories

English
11
ACCESSORIES
WARNING: Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
STANDARD ACCESSORIES
(1) Bull Point (SDS max shank) (Code No. 313471)................................................................ 1
(2) Case (Code No. 314875) ...................................................................................................... 1
(3) Side Handle (Code No. 981870).......................................................................................... 1
(4) Allen Wrench (for 6 mm screw) (Code No. 944459) ......................................................... 1
(5) Allen Wrench (for 5 mm screw) (Code No. 944458) ......................................................... 1
OPTIONAL ACCESSORIES....... sold separately
䡬 Crushing
(1) Bull Point (SDS max shank type)
Overall Length 11-1/32" (280 mm) 15-3/4" (400 mm)
Code No. 313471 313472
䡬 Groove digging and edging
(1) Cold chisel (SDS max shank type)
Overall Length 11-1/32" (280 mm) 15-3/4" (400 mm)
Code No. 313473 313474