Hitachi H 70SA - Page 26

--- 24 ---
PARTS
H 70SA
: ALTERNATIVE PARTS
ITEM
NO.
CODE NO. DESCRIPTION
NO.
USED
REMARKS
1 318-656 STOP LEVER ASS'Y 1 INCLUD.2-6
2 998-423 STOP LEVER 1
3 998-426 NEEDLE ROLLER 1
4 998-424 SPRING CASE 1
5 956-975 LEVER SPRING 1
6 998-425 DAMPER (B) 1
7 998-435 FRONT COVER 1
8 998-420 SECOND HAMMER 1
9 998-428 O-RING (C) 1
10 306-437 NYLOCK HEX. SOCKET HD. BOLT M8X30 6
11 998-427 O-RING (B) 1
12 998-419 O-RING (E) 1
13 998-433 DAMPER (A) 1
14 998-418 SHANK SLEEVE 1
15 956-963 MOUTH 1
16 956-962 MOUTH COVER 1
17 956-961 MOUTH WASHER 1
18 956-960 URETHANE RING 1
19 319-359 CYLINDER CASE 1
20 956-996 O-RING (1AS-60) 1
21 956-958 STRIKER 1
22 306-163 NYLOCK HEX. SOCKET HD. BOLT M8X35 4
23 949-433 BOLT WASHER M8 (10 PCS.) 4
24 998-414 O-RING (A) 1
25 998-415 OIL SEAL (A) 1
26 998-413 PISTON 1
27 944-928 PISTON PIN 1
28 998-434 CONNECTING ROD ASS'Y 1 INCLUD.29
29 944-921 NEEDLE BEARING (NTN 8E-NK 18/20 RDO) 1
30 956-955 CRANK WASHER 1
31 996-364 SEAL LOCK HEX. SOCKET HD. BOLT M8X16 3
32 NAME PLATE 1
33 319-360 GEAR COVER 1
34 630-2VV BALL BEARING 6302VVCMPS2L 1
35 944-916 FINAL GEAR 1
36 944-915 DISTANCE RING (B) 1
37 998-412 INNER COVER 1
38 957-143 SEAL RING (A) 1
39 620-5DD BALL BEARING 6205DDCMPS2L 1
40 956-949 BEARING COVER 1
41 990-079 SEAL LOCK HEX. SOCKET HD. BOLT M5X16 7
42 998-430 CRANK SHAFT 1
43 956-850 WOODRUFF KEY 4X16 2
44 318-655 DAMPER (B) 4
45 944-918 PIN D5X15.8 2
46 993-496 SEAL LOCK HEX. SOCKET HD. BOLT M6X30 8
47 305-633 SIDE HANDLE 1
48 319-365 HANDLE HOLDER 2
49 319-364 HANDLE DAMPER (B) 2
50 310-124 HANDLE DAMPER 4
51 956-969 HOLDER SEAL 1
*
8
---
00