Hitachi H 70SA - Standard Accessories; Optional Accessories

--- 26 ---
501 944-961 BULL POINT 410MM 1
502 943-277 HEX. BAR WRENCH 3MM 1
503 872-422 HEX. BAR WRENCH 6MM 1
601 944-962 COLD CHISEL 410MM (HEX. SHANK TYPE) 1
602 944-964 CUTTER W75X45L (ROUND SHANK TYPE) 1
603 944-966 RAMMER SHANK (HAMMER) 1
604 944-965 RAMMER 200MM 1
605 319-298 SCOOP 380L (ROUND SHANK TYPE) 1
606 306-441 SERVICE KIT (H 65SB) 1 INCLUD.9,11,12,18,20,24,25,38,607,609
607 981-840
GREASE (A) FOR HAMMER.HAMMER DRILL (30G) 1
608 308-471
GREASE FOR HAMMER.HAMMER DRILL (70G) 1
609 930-035 GREASE (SEP-3A) (100G) 1
610 980-927
GREASE FOR HAMMER.HAMMER DRILL (500G) 1
: ALTERNATIVE PARTS
*
PARTS
H 70SA
ITEM
NO.
CODE NO. DESCRIPTION
NO.
USED
REMARKS
92 319-366 HANDLE PIN 2
93 930-153 SUPPORT (B) 1
* 94 958-308Z PILLAR TERMINAL (A) 1 FOR FIN
* 95 938-307 PILLAR TERMINAL 1 EXCEPT FOR NZL.SAF
96 994-273 NOISE SUPPRESSOR 1
* 97 981-974 INTERNAL WIRE 1
* 97 306-681 INTERNAL WIRE 1 FOR GBR
98 990-082 SUPPORT (E) 1
99 992-891 SWITCH (A) (1P SCREW TYPE) W/O LOCK 1
* 100 949-423 WASHER M4 (10 PCS.) 1 EXCEPT FOR NZL
101 319-367 WASHER 2
102 305-631 HANDLE (B) 1
103 301-653
TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 2
104 319-361 HOUSING ASS'Y 1 INCLUD.61,105
105 938-477 HEX. SOCKET SET SCREW M5X8 2
106 319-362 MESH 1
107 306-099 TAIL COVER 1
8
---
00
Printed in Japan
(000810 N)
STANDARD ACCESSORIES
ITEM
NO.
CODE NO. DESCRIPTION
NO.
USED
REMARKS
OPTIONAL ACCESSORIES
ITEM
NO.
CODE NO. DESCRIPTION
NO.
USED
REMARKS