Do you have a question about the Hitachi HA-330 and is the answer not in the manual?
Instructions for removing the top cover, front panel, and bottom plate.
Procedure for removing the equalizer, pre tone, and audio printed wiring boards.
Procedure for setting the idle current using VR701 for optimal bias.
Explains the muting relay for preventing click noise during power-on.
Monitors speaker outputs for DC voltage to prevent speaker damage.
Details the ASO circuit's role in protecting output transistors Q706 and Q707.
Diagram showing the component placement on the audio printed wiring board.
Provides an overview of the amplifier's functional blocks and detailed circuit schematics.
Explains the ASO circuit's operation for output transistor protection.
Details the speaker protection circuit's triggers and corrective actions.
Lists replacement capacitors and resistors with stock and part numbers.
Lists replacement transistors, diodes, and integrated circuits with part numbers.
Lists replacement variable resistors and coils with part numbers.