Need help?Do you have a question about the Hitachi HT -350 and is the answer not in the manual?
Adjust tracking force using balance weight and scale ring to the recommended value for the cartridge.
Match the anti-skating dial to the indicated line according to the cartridge tracking force.
Adjust pitch using the knob while watching the stroboscope until stripes appear still.
Change turntable speed between 33-1/3 and 45 rpm using the speed change knob.
Use the lever for arm lifting, lowering, auto-cut, and stopping playback.
Insert the platter into the record guide and fit the platter mat.
Place the balance weight onto the rear of the tone arm while turning it counterclockwise.
Install the cartridge to the head shell and insert it into the tone arm tip, securing with a locking nut.
Install the player ensuring all four vibration-proof legs contact the table evenly for proper vibration-proofing.
Details on type, platter, motor, speed control, S/N ratio, wow/flutter, and tone arm.
Specifications for cartridge type, frequency response, output voltage, and stylus tip.
Information on power source, consumption, dimensions, weight, and other features.
Adjust tracking force using balance weight and scale ring to the recommended value for the cartridge.
Match the anti-skating dial to the indicated line according to the cartridge tracking force.
Adjust pitch using the knob while watching the stroboscope until stripes appear still.
Change turntable speed between 33-1/3 and 45 rpm using the speed change knob.
Use the lever for arm lifting, lowering, auto-cut, and stopping playback.
Insert the platter into the record guide and fit the platter mat.
Place the balance weight onto the rear of the tone arm while turning it counterclockwise.
Install the cartridge to the head shell and insert it into the tone arm tip, securing with a locking nut.
Install the player ensuring all four vibration-proof legs contact the table evenly for proper vibration-proofing.
Details on type, platter, motor, speed control, S/N ratio, wow/flutter, and tone arm.
Specifications for cartridge type, frequency response, output voltage, and stylus tip.
Information on power source, consumption, dimensions, weight, and other features.
To Next Page
General
