Need help?Do you have a question about the Hitachi PS-48 and is the answer not in the manual?
Guides connection of RCA plugs to amplifier inputs and the AC line cord to a power source.
Details connecting the earth wire to the amplifier's ground terminal to minimize hum.
Step-by-step guide for adjusting the tonearm overhang for optimal tracking.
Details on balancing the tonearm and setting tracking force and anti-skating.
Instructions for adjusting the pitch control knob to stabilize platter speed using the stroboscope.
Explains the operation of the arm lifter and auto cut lever for starting, stopping, and auto-return.
Guides connection of RCA plugs to amplifier inputs and the AC line cord to a power source.
Details connecting the earth wire to the amplifier's ground terminal to minimize hum.
Step-by-step guide for adjusting the tonearm overhang for optimal tracking.
Details on balancing the tonearm and setting tracking force and anti-skating.
Instructions for adjusting the pitch control knob to stabilize platter speed using the stroboscope.
Explains the operation of the arm lifter and auto cut lever for starting, stopping, and auto-return.
General| Effective Length | 220mm |
|---|---|
| Overhang | 15mm |
| Speeds | 33, 45 RPM |
| Wow and Flutter | 0.03% |
| Tonearm | Static balanced type |
| Platter | Aluminum Die-Cast |
| Cartridge | Moving Magnet |
To Next Page
