Travelstar 5K160 (PATA) Hard Disk Drive Specification
166
/
188
14.41 Standby Immediate (E0h/94h)
Command Block Output Registers Command Block Input Registers
Register 7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0
Data - - - - - - - - Data - - - - - - - -
Feature - - - - - - - - Error ...See Below...
Sector Count - - - - - - - - Sector Count - - - - - - - -
LBA Low - - - - - - - - LBA Low - - - - - - - -
LBA Mid - - - - - - - - LBA Mid - - - - - - - -
LBA High - - - - - - - - LBA High - - - - - - - -
Device - - - D - - - - Device - - - - - - - -
Command 1 1 1 0 0 0 0 0 Status ...See Below...
Error Register Status Register
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
CRC UNC 0 IDN 0 ABT T0N AM
N
BSY RDY DF DSC DRQ COR IDX ERR
0 0 0 0 0 V 0 0 0 V 0 V - 0 - V
Figure 120 Standby Immediate Command (E0h/94h)
The Standby Immediate command causes the device to enter Standby mode immediately.
When this command is issued, the device confirms the completion of the cached write commands before asserts
INTRQ. Then the device is spun down, but the interface remains active.
If the device is already spun down, the spin down sequence is not executed.
During the Standby mode, the device will respond to commands, but there is a delay while waiting for the spindle to
reach operating speed.
The Standby Immediate command will not affect the auto power down timeout parameter.
To Next Page
Loading...
Need help?
General