Hitachi NR 90AE (S) User Manual

DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual.
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner
la mort ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Ne jamais laisser les personnes n'ayant pas étutdié le manuel utiliser l'outil.
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias
o en la muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el clavador.
No deje manejar esta herramienta a nadie que no haya leído este manual.
Instruction and safety manual
Manuel d'instructions et de sécurité
Instrucciones y manual de seguridad
Model Nailer
Modèle Cloueur
Modelo Clavador
NR 90AD (S)
•
NR 90AE (S)
NR 90AD (S) NR 90AE (S)
00Cover_NR90AD(S)_US 11/19/10, 2:16 PM1

Hitachi NR 90AE (S) Specifications

General

Operating Pressure	70-120 psi
Fastener Type	Plastic Collated Nails
Fastener Length	2 to 3-1/2 inches
Magazine Angle	21°
Firing Mode	Contact actuation
Air Inlet	N/A (Cordless)
Air Consumption	N/A (Cordless)

Summary

IMPORTANT INFORMATION

DEFINITIONS OF SIGNAL WORDS

Explains hazard alert symbols like DANGER, WARNING, CAUTION.

EXPLANATION OF THE NAILING ACTION OF THE HITACHI NAILER

Describes the two nail firing mechanisms: sequential and contact.

SAFETY

IMPORTANT SAFETY INSTRUCTIONS FOR USING NAILERS

Key safety guidelines for operating the nailer.

PERSONAL PROTECTIVE EQUIPMENT AND WORK AREA SAFETY

Guidelines on PPE, work area cleanliness, and visitor safety.

PROPER NAILER OPERATION AND PRE-USE CHECKS

Instructions for safe handling, operation modes, and pre-operation checks.

SPECIFIC OPERATION HAZARDS AND SAFE PRACTICES

Warnings on nail placement, environment, and proper tool usage.

EMPLOYER'S RESPONSIBILITIES

Employer's duties to ensure safe nailer operation.

OPERATION

NAME OF PARTS

Identifies all components of the nailer.

SPECIFICATIONS

Technical details and performance data for the nailer models.

NAIL SELECTION

Guidance on selecting the correct nails for the nailer.

ACCESSORIES

Lists standard and optional accessories for the nailer.

APPLICATIONS

Common uses and applications for the nailer.

BEFORE OPERATION

WORKING ENVIRONMENT

Requirements for a safe and suitable work environment.

AIR SUPPLY

Details on the compressed air source and connections.

COLD WEATHER CARE

Procedures for using the nailer in cold conditions.

TESTING THE NAILER

Steps for testing the nailer's functionality before operation.

ADJUSTING AIR PRESSURE

How to set the correct air pressure for operation.

LOADING NAILS

Step-by-step instructions for loading nails into the magazine.

NAILER OPERATION

SAFETY GUIDELINES FOR OPERATION

Essential safety precautions to follow during nailer operation.

METHODS OF OPERATION

Explains the two primary operating modes: sequential and continuous.

ADJUSTING THE NAILING DEPTH

How to adjust the nail depth for desired penetration.

MAINTENANCE

MAINTENANCE AND INSPECTION

Procedures for routine checks and upkeep of the nailer.

MODIFICATIONS

Information on product improvements and potential part changes.

SERVICE AND REPAIRS

Guidelines for professional repair and part replacement.

OPERATOR TROUBLESHOOTING

Common problems and solutions for nailer operation issues.