Need help?Do you have a question about the Hitachi NR 90AC2 and is the answer not in the manual?
General| Type | Cordless Framing Nailer |
|---|---|
| Power Source | Battery |
| Battery Voltage | 18V |
| Operating Pressure | 70-120 PSI |
| Usage | Framing |
| Nail Diameter | 0.113" to 0.131" |
| Firing Mode | Sequential or Bump |
| Nail Size | 2" to 3-1/2" |
Addresses issues with nails not being driven, including magazine, nail feeder, and nose problems.
Covers problems related to low air pressure, worn piston rings, or damaged driver blades.
Diagnoses issues with valve components like plungers, bushings, and O-rings.
Troubleshooting air leaks at the exhaust port and cover, related to O-rings and gaskets.
Diagnosing air leaks at the nose and control valve sections, focusing on O-rings and seals.
To Next Page
