Hitachi P 20SF Service Manual


-3-
4. Disassembly of the front base and rear base
• Turn Knob (A) [25], Lock Nut M10 [26], and
Knob (B) [27] counterclockwise to remove the
Front Base [24]. Secure Knob (B) [27] in place
and then pull up Knob (A) [25] to remove it.
Remove the four Tapping Screws (W/Flange)
D4 x 16 (Black) [69] on the Housing Ass’y [59]
to remove the Rear Base [68].
5. Disassembly of the cutter block ass’y from the end bracket
• Set the Cutter Block Ass’y [1][18] in a vice (and be careful to avoid damage), remove Pulley (B) [41],
and then strike the front edge of the spindle of the Cutter Block Ass’y [1][18] to remove the Cutter Block
Ass’y [1][18].

Hitachi P 20SF Specifications

General

Input power	620 W
Power source	AC
Idle speed	17000 RPM
Planning width (max)	82 mm
Chip thickness (max)	2.6 mm
Soft grip	Yes
Product color	Green

Weight and Dimensions

Width	296 mm
Weight	2500 g