Need help?Do you have a question about the Hitachi P 20SF and is the answer not in the manual?
General| Input power | 620 W |
|---|---|
| Power source | AC |
| Idle speed | 17000 RPM |
| Planning width (max) | 82 mm |
| Chip thickness (max) | 2.6 mm |
| Soft grip | Yes |
| Product color | Green |
Weight and Dimensions| Width | 296 mm |
|---|---|
| Weight | 2500 g |
Keep the workspace clean and well-lit to prevent accidents.
Ensure proper grounding and avoid contact with earthed surfaces to prevent electric shock.
Stay alert, use PPE, and maintain balance during operation.
Use the correct tool, maintain it, and store it safely.
Advices on having the power tool serviced by qualified personnel.
Ensure the power source conforms to product nameplate specifications.
Ensure the power switch is in the OFF position before connecting the plug.
Use a suitable and short extension cord for remote work areas.
Describes how to use the trigger switch with the lock-off button.
Explains how to adjust the cutting depth using the knob and scale.
Details rough and finish cutting techniques for shavings and surface smoothness.
Guides on placing the planer and operating it during the cutting process.
Warns about blade contact after operation to prevent injury.
Describes the function and use of the cord holder.
Explains the use of the stand to prevent blade contact.
Instructions for removing the carbide blade using the box wrench.
Steps for installing a new carbide blade, ensuring proper projection.
Procedure to accurately adjust the carbide blade height using set gauges.
Instructions for removing the blade for resharpenable types.
Steps for installing resharpenable blades, ensuring correct protrusion.
Method for adjusting the height of resharpenable blades using set plates.
Recommends using the blade sharpening assembly for convenience and uniformity.
Advises on how often to sharpen blades based on usage.
Instructions on using and maintaining the dressing stone.
Step-by-step guide to securely mount the dust adapter.
Instructions for detaching the dust adapter by reversing the attachment process.
Check blades for sharpness and damage to maintain efficiency.
Emphasizes careful handling of precisely machined parts to maintain accuracy.
Regularly check and tighten mounting screws to prevent accidents.
Monitor carbon brush wear and replace them when they reach the wear limit.
Details the process of removing and replacing carbon brushes.
Advices on checking the motor winding for damage or moisture.
Recommends replacement of the supply cord by authorized service centers for safety.
Mentions the availability of a list for repair and maintenance.
To Next Page
