Hitachi P 20SF User Manual

English
17
PLANER SAFETY WARNINGS
1. Hold the power tool by insulated gripping surface only, because the cutter may
contact its own cord. Cutting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
2. Use clamps or another practical way to secure and support the workpiece to
a stable platform. Holding the work by your hand or against the body leaves it
unstable and may lead to loss of control.
3. Do not use the Planer with the blades facing upward (as stationary type planer).
SYMBOL
WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
To reduce the risk of injury, user must read instruction manual.
SPECIFICATIONS
Voltage 220 V
Power Input 620 W
Cutting Width 82 mm
Max. Cutting Depth 2.6 mm
Weight (without cord and guide) 2.5 kg
No-Load Speed 17000 /min
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the accessories listed in the below.
Box Wrench (for securing cutter blade) 1
Set Gauge (for adjusting cutter height)
1
Guide (with set screw)
1
Blade Sharpening Ass’y
(for Resharpenable Blade Type)
1
000BookP20SFChS.indb17000BookP20SFChS.indb17 2016/07/1913:40:442016/07/1913:40:44

Hitachi P 20SF Specifications

General

Input power	620 W
Power source	AC
Idle speed	17000 RPM
Planning width (max)	82 mm
Chip thickness (max)	2.6 mm
Soft grip	Yes
Product color	Green

Weight and Dimensions

Width	296 mm
Weight	2500 g