– 45 –
Wireless remote controller
When the room temperature
setting is “16”, pressing the
room temperature control
button “ V ” causes no
transmission. At “32”,
pressing “ ” causes no
transmission either.
Q18
The room temperature is
settable within the range of
16 - 32 and not beyond.
A18
The timer cannot be set.
Q19
Is the current time set?
The time cannot be set
unless the clock is adjusted
correctly.
A19
V
The current time disappears
soon.
Q20
The current time disappears
soon and the timer setting
indication takes a
precedence.
A20
When setting the current time,
its indication blinks for
approximately 3 minutes.
In spite of timer “Preprogram”,
the time setting is
extinguished.
Q21
Isn’t the time over the prepro-
grammed time?
As soon as the prepro-
grammed time is reached, the
time setting disappears.
A21
After selecting a
“Dehumidifying” operation
mode, the fan speed mode
remains “LO” fan speed”.
Q22
At a “Dehumidifying”
operation, the “LO” fan speed”
is forcibly selected.
A22
To Next Page
Loading...
Need help?
General
