– 17 –
HSILGNE
FAN OPERATION
User can use the device simply as an air circulator.
Press the MOD E selector so that the display indicat se
(FAN).
Press the
(START/STOP) button. Fan operation starts with
a beep. Press the button again to stop operation.
Set the desired FAN SPEED with the (FAN SPEED) button
(the display indicates the setting).
(AUTO)
(HIGH)
(MED)
(LOW)
(SILENT)
TO START AIR PURIFYING OPERATION
TO CANCEL AIR PURIFYING OPERATION
The air purifier is operated by pressing the (AIR PURIFIER) button.
Ŗ The device beeps when it has received the signal and then the air purifier
starts.
Ŗ The OPERATION lamp on the indoor unit indicators turn on.
Ŗ The fan speed can be changed as desired.
Either HI, MED, LOW or SILENT can be selected.
The power of the air purifier is increased by increasing the speed of the air
conditioner’s fan, by pressing the
(AIR PURIFIER) button while the HEAT,
COOL or DEHUMIDIFY operates.
(Depending on the operation conditions, there is a case that the fan speed does
not increase.)
Press the
(START/STOP) button to stop operation.
Press the (AIR PURIFIER) button again to cancel the air purifier operation.
(During HEAT, COOL or DEHUMIDIFY operation)
AIR PURIFYING OPERATION
START
STOP
1
2
To Next Page
Loading...
