– 31 –
B
E
N
Z
I
N
E
T
H
I
N
N
E
R
A
C
I
D
Air
Blow
3. MAINTENANCE AT BEGINNING OF LONG OFF PERIOD
Ŗ Run the unit by setting the operation mode to (FAN) and
the fan speed to HI for about half a day on a fine day, and dry
the whole of the unit.
Ŗ Switch off the power plug or turn off the circuit breaker.
CAUTION
Ŗ Do not splash or direct water to the body of the unit when cleaning it as this may
cause short circuit.
Ŗ Never use hot water (above 40°C), benzine, gasoline, acid, thinner or a brush,
because they will damage the plastic surface and the coating.