– 59 –
10. High static-pressure switch (Full duct type and semi duct type)
● For full duct type and semi duct type, set the high to HIGH STATIC-PRESSURE.
● If not set to HIGH, there will be reduction of cooling and heating capacities.
Fig. 13-1
Static pressure sw
High
Drain pump test drive sw
Normal
Main P.W.B.
11. Wired remote control receiver circuit
● In wired remote control receiver circuit, the signal will transmit to micro computer pin 3 by using
photocoupler PC101.
Fig. 10-1
To Next Page
Loading...
