– 15 –
ENGLISH
Cooling
“ ”
and
dehumidifying
“ ”
Explanation of the sleep timer
The device will control the FAN SPEED and room temperature automatically so as to be quiet and
good for people’s health.
You can set the sleep timer to turn off after 1, 2, 3 or 7 hours. The FAN SPEED and room
temperature will be controlled as shown below.
Function Operation
The settings of room temperature and circulation are varied.
The room temperature will be
controlled 2°C above the
temperature and the FAN
SPEED will be set to LOW
setting 1 hour after the setting
of the sleep timer.
Fan
“ ”
Operation with the sleep timer
● If date or current time is not set, sleep timer can not be set.
● If you set the sleep timer after the off-, on/off- or off/on-timer has been set, the sleep timer
becomes effective instead of the off-, on/off- or off/on-timer set.
● You can not set other timer during sleep timer operation.
● The angle of horizontal air deflector shifts up automatically after three hours on sleep timer
operation.
● Fan will stop for a while if room temperature reaches setting temperature.
NOTE
Sleep
timer set
1 hour
3 hours later
7 hours later
2 hours
later
6 hours
later
To Next Page
Loading...
Need help?
General
