– 23 –
l The time indication will disappear
automatically in 10 second.
l To check the current time setting,
press the (TIME) button twice.
The setting of the current time is
now complete.
l The timer may be used in three ways: off-timer, on-timer, and ON/OFF(OFF/ON)-timer. Set
the current time at rst because it serves as a reference.
l Asthetimesettingsarestoredinmemoryintheremotecontroller,youonlyhaveto press
the (RESERVE)button in order to use the same settings next time.
2 Press the
(TIME) button.
3 Set the current time with the
TIMER control button.
Example:The current time is 1:30 p.m.
2 Set the turn-off time with the
TIMER control button.
The setting of turn-off time is now complete.
Example:The device will turn offat 11:00p.m.
Example:
The device will turn on at 7:00 a.m.
The setting of the turn-on time is now complete.
4 Set the turn-on time with the
TIMER control button.
5 Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE)button.
The (ON)markstartslightinginsteadofashing and the (RESERVED)
sign lights.Abeep occurs and the (TIMER) lamp lightson the indoor unit.
2 Set the turn-on time with the
TIMER control button.
Example:
The device will turn off at 10:30 p.m. and it will be turned
on at 7:00 a.m.
The settings of the turn-on/off times are now complete.
4 Press the (TIME) button again.
The time indication starts lighting instead of ashing.
3 Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE)button.
The (OFF)markstartslightinginsteadofashingandthesign(RESERVED)
lights.Abeep occurs and the (TIMER) lamp lights on the indoor unit.
3 Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE)button.
The (ON)markstartslightinginsteadofashingandthe (RESERVED)
sign lights.A beep occurs and the (TIMER) lamp lights on the indoor unit.
To Next Page
Loading...
