– 20 –
z
lt is possible to select Mode A or Mode B.For each mode ,up to 6 programs can be set per day. ln total, a
maximum of 42 programs can be set for a week for each mode.
z
If calendar and clock are not set, the reservation setting for WEEKLY TIMER cannot be set.
z
If calendar and clock are not set correctly, WEEKLY TIMER will not operate correctly.
z
Reservation for calendar and clock shall be set rst before operating WEEKLY TIMER.
Step 1: Set the reservation schedule to the remote controller. Send the registered reservation to
indoor unit and then operate.
Step 2: Select Mode A or Mode B and activate or deactivate WEEKLY TIMER.
Step 3: Copy and cancel the reservation schedule.
Step 1: Set reservation schedule to the remote controller. Send the registered reservation
to indoor unit and then operate.
WEEKLY TIMER OPERATION
How to set a WEEKLY TIMER.
1. Select Mode A or Mode B.
Press
(WEEKLY) button. WEEKLY lights up. and blink on
the display. (Mode A is selected).
Press (WEEKLY) button again. and blink on the display.
(Mode B is selected).
z
If no reservation has been made, ON/OFF,
, appear.
z
If reservation has been made, ON/OFF, , will not appear.
2. Set a program.
Press
(WEEKLY) button for about 3 seconds. The selection mode
can be changed.
, day: Mon, program no. : 1, ON/OFF, setting time and setting
temperature blink on the display.
3. Select the desired day of the wekk.
Press (DAY) button.
The day changes from Mon
Tue
Wed
Thu
Fri
Sat
Sun
Mon, Tue, Wed, Thu, Fri, Sat, Sun [Full days]
Mon, Tue, Wed,
Thu, Fri [weekday]
Sat, Sun [weekend]
Mon
Tue ......
Select [Full days] for daily reservation.
Select [weekday] for Monday to Friday reservation.
Select [weekend] for Saturday and Sunday reservation.
z
After reservation has been set, it is easy to check and edit at the same
time.
4. Press
button to select a program number.
The number changes from 1
2
3
4
5
6
1
2 .....
z
If program number has been set, follow above in order to make
changes.
To Next Page
Loading...
