EasyManua.ls Logo

Hitachi RAK-25N6 - Air Flow Louvers Adjustments

Hitachi RAK-25N6
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 14 –
AIR FLOW LOUVERS ADJUSTMENTS
1
2
Adjustment of the conditioned air to the left and right.
Hold the vertical air de ector as shown in the  gure and adjust
the conditioned air to the left and right.
If the “ (AUTO SWING)” button is pressed
once, the horizontal air de ector swings up and down.
If the button is pressed again, the de ector stops in its
current position. Several seconds (about 6 seconds) may
be required before the de ector starts to move.
Use the horizontal air de ector within the adjusting range
shown on the right.
When the operation is stopped, the horizontal air de ector
moves and stops at the position where the air outlet
closes.
!
CAUTION
In “Cooling” operation, do not keep the horizontal air
de ector swinging for a long time. Some dew may form
on the horizontal air de ector and dew may drop.
Adjustment of the conditioned air in the upward and downward
directions.
The horizontal air de ector is automatically set to the proper
angle suitable for each operation. The de ector can be swung
up and down continuously and also set to the desired angle
using the “ (AUTO SWING)” button.
RAK-25-35-50N6 (1).indd 14 1/5/13 11:11 AM
Process Black

Related product manuals