Removing the indicating P.W.B.
the control P.W.B.
2. Remove the upper hook from the indicating
P.W.B. lock resin, pull the P.W.B. forward a
little and remove it.
Removing electrical parts
1. Remove the electrical parts cover.
2. Remove the connectors from the CN4 (heat exchange
thermistor), CN15 (stepping motor) and CN2 (fan motor).
3. Remove t lock screws.
Removing control P.W.B.
1. Remove the connectors from the CN3.
2. Remove the P.W.B. from the P.W.B. support.
STRUCTURE OF AN INDOOR UNIT ELECTRIC PARTS
CN16
hree
RAK-18/25/35/50PED
RAK-25/35/50PEDC
FIXTURE SCREW
FIXTURE SCREW
FIXTURE SCREW
REVOC .L ACIRTCELE
To Next Page
Loading...
